Page 1 sur 1

UART Connection - Voltage Translation

Message non luPosté: Sam 3 Jan 2015 15:33
de awneil
The AirPi UART connection to the Raspberry Pi header has a voltage shifter which uses the 3.3V from the Raspberry Pi as reference:

AirPi_UART_Voltage_Shifter.png
AirPi UART Voltage Shifter
AirPi_UART_Voltage_Shifter.png (8.47 Kio) Vu 2972 fois


Is it permissible to apply, say, 5V to the reference input - to allow connecting to a 5V microcontroller :?:

Or 2.4V, or ...

Re: UART Connection - Voltage Translation

Message non luPosté: Sam 3 Jan 2015 15:55
de awneil
awneil a écrit:Is it permissible to apply, say, 5V to the reference input - to allow connecting to a 5V microcontroller

That is, of course, instead of connecting a Raspberry Pi.